Here are the pix.
1:1 W2DU current balun feeding 25ft of RG-8X coax into the shack.
Using Kenwood AT-120 Tuner into Kenwood TS-120S.
This is hung from the ceiling with an eye-bolt. Screwed right into the roof. No leaks!
50 ohm RG-8X 25ft coax goes down through the walls into the shack on second floor.
Now to find a good ground…hmm
1:1 W2DU Current Balun at midpoint
Then see how the 40m 64 feet is strung along the rafters:
the 40m run
Then we let the extra drop down at the ends.
I could have just zigged it more to take up the slack?
end of wire
My upgrade might be a 160m dipole with a new Tuner that takes ladder line…